Every day, we flush the toilet. occasionally, even several times each day. Unfortunately sometimes toilet swirls, But it’s not until our flush starts stop working and we can’t flush the contents of our toilet bowl that we realize how important this simple but essential gadget is to our daily lives.
You are in the right place if you just realized this truth after emptying yourself into the toilet and trying to flush it, only to find out that it swirls but won’t flush.
We have attempted to include practically all potential causes of the aforementioned issue in this post, along with some at-home fixes. We have also discussed instances in which calling a plumber is preferable to get your hands filthy.
Whether the toilet is your favorite place to read or the last place you want to visit when nature calls, it can easily go from refreshing to revolting in no time. Toilet troubles might be annoying, but they don’t have to make you cringe every time you use your bathroom. Learn how to deal with toilet swirls and won’t flush toilets with this easy to understand guide.
So, if your toilet bowl currently contains unpleasant material that won’t go away, I advise you to stay for 10 minutes, read this article in its entirety, and you could just succeed in overcoming this obnoxious and seemingly insurmountable challenge.
Possible Roots and Their Remedy
Water Level is Low
The absence of water that enters the toilet bowl when you flush it is one of the most likely reasons why your toilet swirls but won’t flush. The contents of your toilet bowl won’t ever disappear if you don’t flush with the proper amount of water each time. Flushing a toilet successfully requires a lot of water. There may be several causes for this problem. The most typical ones are given here, along with advice on how to handle them.
The tank is not filling
The water needed for flushing is kept in flush tanks. The minimum level at which the tank must be filled to have enough water for a successful flush is always marked on the inside of the tank by the manufacturer.
The mark is typically located one inch below the overflow tube’s top. It is possible, though, that the tank is not filling to that level for whatever reason. It could be that you manually set it to fill below that line to conserve water.
Additionally, it might occur as a result of a problem with the system that controls the water level inside the tank. Typically, a little rubber ball that rises with the water level is employed for this purpose, closing the tank’s water inlet in the process. Additionally, some tanks use a floating cup ballcock to control the water level.
Simple upward bending of the ball’s rod is all that is required if your tank contains a floating ball. It will let in more water the more you bend it. If a floating cup ballcock is present in your tank, you will need to turn the float adjustment screw to allow additional water to enter.
Damaged Flapper
A flapper is a rubber cap that prevents water from the flush tank from spilling into the toilet bowl by acting as a barrier. A chain attached to the flapper is pulled open when you hit the flush button or lever, allowing all of the water in the tank to flow into the toilet. However, flappers can deteriorate with time and start to leak, which lowers the volume of water in the tank.
Solution: Buying a new flapper is the only way to fix your flapper. A fresh flapper is simple to locate in your neighborhood supermarket, and it is as simple to replace. You can always call the plumber, though, if you lack the confidence to handle it yourself.
Lift chain fault
The chain that raises your flapper when you press the flush button is known as the lift chain. However, after time, your lift chain may get too slack and prevent you from raising the flapper sufficiently to release all the water.
In case such a situation occurs, the lift chain has many anchor points. Therefore, resolving this problem is simple. All that needs to be done is to disconnect the lift chain from its current anchor point and connect it to one that is lower so that it has no more than a half-inch of extra chain.
Obstructed jet holes
When you flush the toilet, water is pushed into the bowl through tiny holes beneath the rim known as jet holes. Jet holes can become blocked by the buildup of minerals, especially if your property experiences more difficult water conditions than typical. The amount of water that enters your toilet will decrease as a result of this obstruction.
Solution: Pour warm vinegar through the overflow tube and wait for at least an hour to clear your jet holes. You’ll then need to flush your toilet and go through the process again. The remaining debris that was clogging your jet hole must then be removed using a thin rod.
Drain, Toilet flange, or Toilet clog
The most frequent cause of any issue that could arise with your toilet is a clog in the toilet, toilet flange, or drain. When you or your young child flushes something other than toilet paper down the toilet, it frequently clogs.
The next most likely explanation is a toilet clog if you notice that your toilet swirls but won’t flush and you’ve checked the water level in the flush tank, which appears to be acceptable.
Toilet clogs can be extremely difficult to deal with, and you might need a professional’s assistance to resolve the issue. You can try one of the following methods, though, if you are confident in your ability to fix the problem on your own and wish to.
Plunger
The most popular way for clearing clogged toilet drains is using a plunger. Additionally, it is a simple one. The plunger must be set on the toilet’s mouth, and suction must be created by pushing and pulling.
However, employing a plunger is not a particularly effective technique because there is a chance of pushing the obstruction deeper down the drain.
Auger
Your toilet drain can be cleared more effectively by using an auger. To access the deeper sections of toilet drains, Auger employs a flexible metal pipe.
They are sometimes also called snakes because of their shape. However, augers are more difficult to use than plungers and should only be handled by experts.
The toilet’s height and style.
The effectiveness of your flush is significantly influenced by the height of your toilet. The toilets on higher floors flush significantly better than those in the basement or on the first floor.
This is because of the water’s tremendous potential energy, which causes it to pour into the toilet with greater astounding speed and pressure when kept in tanks on higher floors.
Therefore, you should call a plumber to fix the problem if the “toilet swirls but won’t flush” problem affects a toilet on the lower floor.
Additionally, toilets with inadequate design may have ineffective flushing mechanisms. If your toilet has consistently had flushing issues, it may be because your drain was designed incorrectly.
To ensure that the water flows through the toilet swiftly, toilet drains should be sloped downward. However, if your drain doesn’t have an adequate slope, the speed of the water and the flushing effectiveness may be affected. Only a plumber can resolve your problem in this situation as well.
Obstructed vents
Since plumbing and vent pipes in a house are connected, improperly installed or clogged vents can also affect your drainage system.
The likelihood that this is the cause of your “toilet swirls but won’t flush” problem is low, therefore this should only be thought of as a last resort. Additionally, only a specialist can resolve this problem.
Conclusion for toilet swirls
Your problem has likely been resolved by now if, as we urged you to do at the beginning of this post, you carefully read through this tutorial. In conclusion, you must first determine whether the water is being given with the proper volume and pressure if your toilet swirls but won’t flush.
If not, you must ascertain the cause and approach the problem appropriately. In that case, you must look for a clogged drain. You should seek professional assistance if the problem is not caused by anything other than a clogged toilet.
Leave a Reply